MINI ARM 7 KIT LPC2148 BASED
Features:
MINIARM7 KIT is Very Easy to Use for Learners and Project Purpose
All the Boards are Breakout Boards - Main baord and Daughter Board
Main Board Incudes Power supply , 2 RS232 Ports, JTAG Connecter , USB Connecter
Daughter Board Includes Crystal 12MHZ , ARM Chip and Burgconnecters connected to Ports with names
MINIARM -LPC 2148 incudes USB Port with self Powered
LPC2148 Chip Features:
The LPC2148 are based on a 16/32 bit ARM7TDMI-S™ CPU with real-time emulation and embedded trace support, together with 128/512 kilobytes (kB) of embedded high speed flash memory. A 128-bit wide memory interface and a unique accelerator architecture enable 32-bit code execution at maximum clock rate. For critical code size applications, the alternative 16-bit Thumb Mode reduces code by more than 30% with minimal performance penalty. With their compact 64 pin package, low power consumption, various 32-bit timers, 4- channel 10-bit ADC, USB PORT,PWM channels and 46 GPIO lines with up to 9 external interrupt pins these microcontrollers are particularly suitable for industrial control, medical systems, access control and point-of-sale. With a wide range of serial communications interfaces, they are also very well suited for communication gateways, protocol converters and embedded soft modems as well as many other general-purpose applications.
Package Content:
* MINI ARM 7 Development Board
* Rs232 Port Cable for ISP Programming
* Software CD( Phuilips Downloader,Data sheets,Example Porograms,Manual, Keil3 Evalution MAX 16 kb
* Burg Connecter 20 Nos
* USB Port Cable for Power Supply
All the Boards are Breakout Boards - Main baord and Daughter Board
Main Board Incudes Power supply , 2 RS232 Ports, JTAG Connecter , USB Connecter
Daughter Board Includes Crystal 12MHZ , ARM Chip and Burgconnecters connected to Ports with names
MINIARM -LPC 2148 incudes USB Port with self Powered
LPC2148 Chip Features:
The LPC2148 are based on a 16/32 bit ARM7TDMI-S™ CPU with real-time emulation and embedded trace support, together with 128/512 kilobytes (kB) of embedded high speed flash memory. A 128-bit wide memory interface and a unique accelerator architecture enable 32-bit code execution at maximum clock rate. For critical code size applications, the alternative 16-bit Thumb Mode reduces code by more than 30% with minimal performance penalty. With their compact 64 pin package, low power consumption, various 32-bit timers, 4- channel 10-bit ADC, USB PORT,PWM channels and 46 GPIO lines with up to 9 external interrupt pins these microcontrollers are particularly suitable for industrial control, medical systems, access control and point-of-sale. With a wide range of serial communications interfaces, they are also very well suited for communication gateways, protocol converters and embedded soft modems as well as many other general-purpose applications.
Package Content:
* MINI ARM 7 Development Board
* Rs232 Port Cable for ISP Programming
* Software CD( Phuilips Downloader,Data sheets,Example Porograms,Manual, Keil3 Evalution MAX 16 kb
* Burg Connecter 20 Nos
* USB Port Cable for Power Supply
MINI ARM 7 KIT LPC2148 BASED
Specifications of Board:
* Use 16/32 Bit ARM7TDMI-S MCU No.LPC2148 from Philips (NXP)
* Has 512KB Flash Memory and 40KB Static RAM internal MCU
* Use 12.00MHz Crystal, so MCU can process data with the maximum high speed at 60MHz when using it with Phase-Locked
* Has RTC Circuit (Real Time Clock) with 32.768 KHz XTAL and Battery Backup.
* Support In-System Programming (ISP) and In-Application Programming (IAP)through On-Chip Boot- Loader Software via Port UART-0 (RS232)
* Has circuit to connect with standard 20 Pin JTAG ARM for Real Time Debugging
* 7-12V AC/DC Power Supply.
* Has standard 2.0 USB as Full Speed inside (USB Function has 32 End Point)
* Has Circuit to connect with Dot-Matrix LCD with circuit to adjust its contrast by using 16 PIN Connector.
* Has RS232 Communication Circuit by using 2 Channel.
* Has SD/MMC card connector circuit by using SSP.
* Has EEPROM interface using I2C.
* Has PS2 keyboard interface.
* LCD Display Interfaced
* VGA Aocket Interfaced
* All port pins are extracted externally for further interfaces.Figure displays
* Has 512KB Flash Memory and 40KB Static RAM internal MCU
* Use 12.00MHz Crystal, so MCU can process data with the maximum high speed at 60MHz when using it with Phase-Locked
* Has RTC Circuit (Real Time Clock) with 32.768 KHz XTAL and Battery Backup.
* Support In-System Programming (ISP) and In-Application Programming (IAP)through On-Chip Boot- Loader Software via Port UART-0 (RS232)
* Has circuit to connect with standard 20 Pin JTAG ARM for Real Time Debugging
* 7-12V AC/DC Power Supply.
* Has standard 2.0 USB as Full Speed inside (USB Function has 32 End Point)
* Has Circuit to connect with Dot-Matrix LCD with circuit to adjust its contrast by using 16 PIN Connector.
* Has RS232 Communication Circuit by using 2 Channel.
* Has SD/MMC card connector circuit by using SSP.
* Has EEPROM interface using I2C.
* Has PS2 keyboard interface.
* LCD Display Interfaced
* VGA Aocket Interfaced
* All port pins are extracted externally for further interfaces.Figure displays
VOICE RECOGNITION KIT:
The speech recognition system is a completely assembled and easy to use programmable speech recognition circuit. Programmable, in the sense that you train the words (or vocal utterances) you want the circuit to recognize. This board allows you to experiment with many facets of speech recognition technology. It has 8 bit data out which can be interfaced with any microcontroller for further development. Some of interfacing applications which can be made are controlling home appliances, robotics movements, Speech Assisted technologies, Speech to text translation, and many more.
Features:
* Self-contained stand alone speech recognition circuit- User programmable
* Up to 20 word vocabulary of duration two second each Multi-lingual
* Non-volatile memory back up with 3V battery onboard.
* Will keep the speech recognition data in memory even after power off.
* Easily interfaced to control external circuits & appliances
Specification:
* Input Voltage - 9 to 15 V DC Use a commonly available 12V 500ma DC Adapter
* Output Data - 8 bits at 5V Logic Level
* Interface - Any microcontroller like 8051, PIC or AVR can be interfaced to data
port to interpret
Applications:
There are several areas for application of voice recognition technology..
* Speech controlled appliances and toys
* Speech assisted computer games
* Speech assisted virtual reality
* Telephone assistance systems
* Voice recognition security
* Speech to speech translation
Posts
